EN
ທຸກຫມວດຫມູ່
EN

ໜ້າ ທຳ ອິດ>ຂ່າວ>ມາດຕາວິທະຍາສາດທີ່ນິຍົມ

ສິ່ງທີ່ຄວນເອົາໃຈໃສ່ໃນການຜະລິດປະຕູຮົ້ວປະຕູແລະປ່ອງຢ້ຽມເມື່ອທຽບກັບສູດ TPE ທີ່ທັບຊ້ອນ?

ເວລາ: 2020-05-25 ຜູ້ຊົມ: 1

A: The melt index is different. The melt index of extrusion products is generally lower than that of injection molding. When the melt index is higher, it is not easy to build pressure when extruding, resulting in uneven discharge; in addition, the melt strength will be low. The case of broken bars. Other properties such as compression set, tensile strength, hardness, etc. are made according to customer requirements.