EN
Všetky kategórie
EN

home>Produkt>Blokový kopolymér styrénetylén-butylénstyrén

SEBS(Styrene Ethylene Butylene Styrene Block Copolymer)YH-561T


POPIS

SEBS YH-561T is a grade specially developed for low-hardness elastomer products. It’s a mixture of SEBS YH-503 and YH-602 at certain proportion. Its outstanding feature is that it has a higher elastic modulus under high oil filling rate, and its elastic recovery is better than other grades. Under the same oil filling rate, the surface of the products produced by SEBS YH-561T is more dry, non-sticky, high in hardness. It is mainly used for soft toys, vibration-damping sheets

APLIKÁCIE

soft toys, vibration-damping sheets

CHEMICKÉ VLASTNOSTI
StupeňYH-561T
Štruktúra polyméruZmiešaný
S/B Content%33 / 67
300% Tensile Strength Mpa≥6.5
Ensile Strength Mpa26.5
Elongation %490
Permanent Set %20
Tvrdosť Shore A80
Toluene Solution Viscosity at 25 ℃ and 25%,mpa.s1200
Hlavné aplikácieAdhesives Coating Plastic Asphalt modification Cable/Wire Compoundng Sealants


OTÁZKA