EN
Vaega faapitoa uma
EN

Fale>mea e gaosi>Styrene Ethylene Butylene Styrene Block Copolymer

SEBS(Styrene Ethylene Butylene Styrene Block Copolymer)YH-561T


FAAMATALAGA

SEBS YH-561T is a grade specially developed for low-hardness elastomer products. It’s a mixture of SEBS YH-503 and YH-602 at certain proportion. Its outstanding feature is that it has a higher elastic modulus under high oil filling rate, and its elastic recovery is better than other grades. Under the same oil filling rate, the surface of the products produced by SEBS YH-561T is more dry, non-sticky, high in hardness. It is mainly used for soft toys, vibration-damping sheets

TALOSAGA

soft toys, vibration-damping sheets

Vailaau FAAFITAULI
vasegaYH-561T
Polymer Faatulagagafefiloi
S / B Mataupu%33 / 67
300% Tensile Strength Mpa≥6.5
Ensile Strength Mpa26.5
Elongation %490
Permanent Set %20
Faigata Shore A80
Toluene Solution Viscosity at 25 ℃ and 25%,mpa.s1200
Faʻamatalaga AutuAdhesives Coating Plastic Asphalt modification Cable/Wire Compoundng Sealants


fesili